TROUBLESHOOTING

TROUBLESHOOTING

Check Circuit Breaker or Fuses

  1. Make sure the circuit breaker or fused disconnect switch is turned on.
  2. If you have a circuit breaker flip it back and forth to make sure that it is really on. Some circuit breakers, if they have tripped, will not be obviously in a tripped position. By flipping it back and forth you will reset the circuit breaker.
  3. Check voltage of your power supply at the receptacle using your multi-meter set to the next highest AC voltage above 240 (typically this will be 600 volts but may be 250)
  4. Check fuses for voltage continuity. You can do this with your multi-meter.
  5. Make sure fuses or circuit breaker are/is the proper amperage and type. See your wiring diagram for the required fuse type.

CAUTION: This test should only be done by an experienced person familiar with electricity.