Click on image to enlarge
Fuego Hobby Kiln
More images
Furniture Kit
H-F-1418/00 ($150.00)
Three 12" Full Round Shelves (1/2" thick), # Four each of 1/2", 1", 1-1/2", 2", 3", & 4" High 1" Triangular Ceramic Posts #, 1 pound Cone 10 Kiln Wash
Questions? Quote?
Send an email to sales@hotkilns.com or
call 800-750-8350.
call 800-750-8350.
F1418 Hobby Kiln
Model F1418 Fuego Hobby/Craft Kiln reaches Cone 10 operation on standard international household voltage of 220 to 240 volts. Available in two amp ratings - 13 amps for UK systems or 15 amps for most other 220-240 volt systems.
$1495
3" (76mm) K23 Premium Firebrick backed up with 1/8" (3 mm) Non-RCF Ceramic Fiber Paper
Top-Loading
One section
7 sides
1.5 cubic ft (42 Liters)
145 pounds (64 Kg)
13.5" Diam x 18" High
34 cm Diam x 45.7 cm High
34 cm Diam x 45.7 cm High
22" Wide x 27" Deep x 31" High
55.9 cm Wide x 68.6 cm Deep x 78.7 cm High
55.9 cm Wide x 68.6 cm Deep x 78.7 cm High
Part Number
Watts
Volts
Phase
Fuse Size
K-F-1418/41
3000 W
220-230 V
Single Phase
Maximum Temperature
- Max TemperatureCone 10, 2350F, 1290C
Additional Electrical Information
- Amps13
- Max TemperatureCone 10, 2350F, 1290C
- Wire ConnectionHousehold current plug and cord specific for the country where the kiln is shipped
- Wire Ga for Connection
- Branch FusingNo
Certifications and Markets
- InternationalMade for non-USA markets only
- CECertified to CE Directives
- UL499Not listed to UL499
[sell_price]
K-F-1418/4E
3500 W
220-230 V
Single Phase
Maximum Temperature
- Max TemperatureCone 10, 2350F, 1290C
Additional Electrical Information
- Amps15
- Max TemperatureCone 10, 2350F, 1290C
- Wire ConnectionHousehold current plug and cord specific for the country where the kiln is shipped
- Wire Ga for Connection
- Branch FusingNo
Certifications and Markets
- InternationalMade for EU market
- CECertified to CE Directives
- UL499Not listed to UL499
[sell_price]
Two 9” high sections stack on top of each other. The element connection box/control box hold the entire kiln together as an integrated unit. The kiln is very easy to assemble and disassemble.
Stainless steel wrapped around shaped firebrick. There are three adjustable clamps welded to each casing. All assembly is with stainless steel screws. The kiln sections sit on a separate stand.
Simple strong hinge with chain for door support
Heavy-duty 14 gauge full solid stand with multiple bends for strength. Legs bolt on with heavy 1/4-20 stainless bolts. The metal is aluminized for good corrosion resistance.
A proprietary brick coating is applied to all interior surfaces of the kiln. This is put on before the element holders are inserted. This coating penetrates the firebrick and fuses the surface on a microscopic level which helps prevent dusting and crumbling of the fragile firebrick.
Solid ceramic peephole plugs with full 1” diameter. Three total: one per section plus one in the lid for ventilation.
Single Zone.
8 Ga Type K Exposed Thermocouple in Mullite Protection Tube (4.5" long /114mm)
Mounted on control panel
One box.
Controls are mounted in a removable box.
Durability
Performance
Ease of Use
Support
Serviceability
Safety
36" Wide x 36" Deep x 37" High
91 cm Wide x 91 cm Deep x 94 cm High
91 cm Wide x 91 cm Deep x 94 cm High
150 lbs (68 kg)
+ Kit lbs (175 kg)
+ Vent 79 lbs ( kg)
+ Kit + Vent lbs ( kg)
Skidded Carton with Foam-in-Place packaging
