Extra Case Clamps

Redundancy

  • The stainless steel case of each kiln section is held together by three adjustable stainless steel clamps.
  • If one fails two are adequate to hold the case together.
  • Two clamps are used on lids and bottoms.
  • The clamps are easily accessible for adjustment.

Reinforcement

  • Behind the clamps the stainless steel case is reinforced with a piece of aluminized steel to prevent distortion. THIS MAKES THIS TYPE OF CONSTRUCTION MUCH STRONGER THAN ON COMPETITIVE KILNS.

Standard on all L&L sectional kilns

  • This method of construction is used on all L&L sectional kilns.

Easy to Adjust