Questions? Quote?

Send an email to sales@hotkilns.com or
call 800-750-8350.

TB644754 Industrial Kiln

Model TB644754 100 cubic foot Bell-Lift Kiln. Includes motorized lift, Three-Zone Multi-Program DynaTrol (and other industrial controls are also available). 66” wide by 47” deep by 54” high. Larger and smaller models can be built. The kiln reaches 2350°F (1290°C or cone 10).Variations of this are available. Please contact sales@hotkilns.com for a detailed quotation. The typical delivery for these large kilns is 14 to 16 weeks. See this page for assembly photographs to see how easy it is to put one of these kilns together. Direct power connection. Cone 10 for all voltages.

3" (76 mm) K23 Premium Firebrick
Bell-Lift
Six 9" high sections
4 sides
100 cubic ft (2832 Liters)
3800 pounds (1724 Kg)
66" Wide x 48-1/2 Deep x 54" High
167.6 cm Wide x 123.2 cm Deep x 137.2 High
77" Wide x 73-1/2" Deep x 150" High
195.6 cm Wide x 186.7 cm Deep x 1127 cm High
Part Number
Watts
Volts
Phase
Fuse Size
K-T-6454/62
87840 W
460-480 V
Three Phase (Delta)
250 Amp

Maximum Temperature

  • Max TemperatureCone 10, 2350F, 1290C

Additional Electrical Information

Certifications and Markets

  • InternationalMade for all markets
  • CENot CE certified
  • UL499Not listed to UL499
[sell_price]

Click on Red Arrow to expand specifications for each voltage. When printing the page expand the voltage specifications first.

The whole support frame is made from heavy duty welded parts that are easily assembled on site so that the system can be easily broken down for inexpensive common carrier shipping. (It is a two
The welded angle-iron stand is separate but attached to the case. It includes leveling bolts and holes for anchoring the kiln to the floor. The angle-iron frame is covered with a layer of aluminized steel which the bottom of the kiln sits on.
A proprietary brick coating is applied to all interior surfaces of the kiln. This is put on before the element holders are inserted. This coating penetrates the firebrick and fuses the surface on a microscopic level which helps prevent dusting and crumbling of the fragile firebrick.
Solid ceramic peephole plugs with full 1” diameter. Six total: one per section.
Three control zones with three separate thermocouples. More about zone control.
8 Ga Type K Exposed Thermocouple in Mullite Protection Tube (4.5" long /114mm)
Mounted on panel
Floor-mount Plug-in.
Control box cover is hinged for easy access to inside of control box. DynaTrol is in a removable handheld box. Entire control box is removable.

Durability

Durability, Repairability, Better Heat Transfer. The smooth, hard surface of the inside ceramic channel allows the elements to expand and contract freely. No pins! The dense ceramic holders extend element life because they do not insulate the hot elements from the kiln interior.
Mullite protection tubes extend thermocouple life and keep kiln clean. The mullite protection tube keeps the metal oxides of the thermocouple tip from dropping off and contaminating your work.
Thick 8 gauge thermocouples last a long time. Special Limit of Error to ANSI MC96.1 specifications is used.
Industrial grade ceramic terminal blocks make changing elements easy.
Special brick coating hardens and seals brick for durability and cleaner operation.
Three case clamps per 9" high kiln section are redundant safety for your L&L kiln.
Arched sides on DaVinci kilns are very strong and promote good air circulation

Performance

DynaTrol with 4 Easy-Fire programs (Slow Bisque, Fast Bisque, Slow Glaze, Fast Glaze), 6 custom programs, PreHeat, Delay, Program, Segment Review, and Diagnostics. Zone control included on most kilns.
Zone control gives you the utmost in controllable temperature uniformity. The DynaTrol separately measures temperatures in the bottom, middle and top of the kiln and automatically adjusts the heat output of three zones during the entire firing.
K23 firebrick combines good insulation with strength

Ease of Use

Solid large non-tapered peepholes allow a wider view into the kiln.
Load your DaVinci kiln from all four sides. Available on T3400 and X3200 Series.

Support

The combined experience at L&L Kilns in kilns, ceramics, electrical engineering and process engineering is unsurpassed. We work as a team to help you get you answers and help.

Serviceability

DaVinci Panels are wired to industrial standards with good clean wire layout.

Elements

The combination of 1/2" diameter element coils, the doubled surface area of the Quad element design, and superior heat transfer of L&L's patented ceramic element holders, make this the best element system in the world today. 

APM elements increase element life in difficult applications

Thermocouples

Type S Platinum Thermocouples are recommended for high fire applications

Pyrocil thermocouples are sensitive but limited to about 2200°F but offer greater sensitivity to temperature change and so may be appropriate in applications below 2200°F that require sensitivity.

Vents

The L&L Vent-Sure Kiln Vent is the most powerful downdraft kiln vent on the market today. That means you have more flexibility in the installation.

The Vent Control allows you to automatically control the operation of the Vent-Sure kiln vent with one of the outputs from the DynaTrol (or Genesis). 

Kiln Furniture

Cone 10 Kiln wash is used to coat shelves to prevent sticking of glaze.

These safety gloves are perfect for handling hot work when unloading a kiln.

Controls

Control, monitor and record data for up to 10 kilns from your computer for a one-time price.

Electronic High Limit Back Up Control acts as an upper limit back up to the main control.

The Eurotherm 2604 is an indutrial-grade PID control with two or three zone cabability built in.

Power

L&L's 480 volt option can include a NEMA 1 control panel

This option helps protect your control from electrical noise

Powered bottoms increase power and can aid uniformity in large kilns

Flat Bed Truck or 40 Foot Container



4000 lbs (1815 kg) + Kit 4000 lbs (1815 kg) + Vent 4000 lbs (1815 kg) + Kit + Vent 4000 lbs (1815 kg)
Two Wooden Crates