INSTALLATION & ASSEMBLY SUPPORT

INSTALLATION & ASSEMBLY SUPPORT

INSTALLATION & ASSEMBLY

  1. Site Preparation: The checklist emphasizes the importance of selecting an appropriate location for your kiln, considering factors such as space, ventilation, and electrical requirements.

  2. Kiln Assembly: Detailed instructions are provided for assembling the kiln components accurately and securely, ensuring stability and safety.

  3. Electrical Setup: Proper electrical installation is crucial for kiln operation. The checklist highlights the significance of consulting with a qualified electrician to ensure compliance with safety codes and proper wiring.

  4. Ventilation and Exhaust: Adequate ventilation is emphasized to remove fumes and maintain a safe environment. The checklist suggests appropriate venting systems and addresses the importance of vent placement.

  5. Kiln Safety: The checklist emphasizes safety measures, such as installing a kiln safety switch and using proper protective gear.

  6. Test Firing: Conducting a test firing is recommended to ensure that the kiln operates correctly before firing valuable pieces.

INSTALLATION VIDEOS

Learn How to Install a Kiln Vent

From Jessica Putnam-Philips:

Yes, you can install a kiln vent. If I can do it you can do it! In this video, I walk you through all the steps to safely install the kiln vent.

  • Tools and Materials:
  • Kiln Vent Kit
  • Flat Head Screwdriver
  • Phillips Screwdriver
  • Electric Drill with 1/4" bit
  • Yard Stick
  • Pencil Work
  • Gloves

    • INSTALLATION AND ASSEMBLY PDFS

    General Installation Instructions

    Installation requirements and checklist. all kilns. (Note: There is a more specific version of this for Easy-Fire and School-Master kilns.)

    Installation Instructions Easy-Fire & School-Master Kilns
    Installation instructions for both the Easy-Fire and School-Master kiln lines. Revision:4-15-12
    Assembly Instructions for L&L Easy-Fire and School-Master Kilns
    Step by step assembly instructions for both Easy-Fire and School-Master kiln lines.
    Assembly Instructions for L&L Jupiter Automatic Kilns
    Step by step assembly instructions for Jupiter Automatic kilns.
    Davinci Checklist
    Assembly Instructions for DaVinci Kilns
    Step by step set up and assembly instructions.
    Easy-Load Installation Checklist
    Easy-Load Front-Loader Shipping Checklist
    eFL Front-Loading Kiln Checklist

    The unpacking portion of this checklist only applies to the special crate used in the continental USA and Canada. eFL kilns shipped to Hawaii, Alaska, Puerto Rico, Mexico, and other international destinations will be packed in an ISPM-15 plywood crate and will need a forklift to install the kiln.

    Fuses for Electric Kilns
    All about the kinds of fuses used on electric kilns
    Voltage Information for Electric Kilns
    Complete information on voltage, circuits and wiring for electric kilns

    INSTALLATION KNOWLEDGEBASE

    Is there a Kiln Installation Checklist?
    See this page.
    Weight of Kiln Rings or Sections and Tops and Bottoms for Lifting Guidance

    All weights are shown in pounds and are estimates.

    How do I hook up my kiln to power?

    L&L's official recommendation is for an electrician to connect the kiln to power. You should

    How to size the circuit breaker, fuses, cord and/or power supply of your kiln.
    Safety Warnings

    NOTE: If you are unsure about some part or procedure in creating or testing a

    What wire gauge should you use for along wire run to your kiln?
  • The wire gauge recommendations in our "Wire Gauge for Connection" specifications are based on
    • What wire size is used to connect a kiln?

    When you are installing the circuit for your new kiln, it is important to use the correct type

    How to handle power interruptions, blackouts, and bad electrical power grids
  • In some places, the electrical power is very inconsistent with power outages, interruptions,
    • Why kiln amperage is higher than the rating when first turned on
  • When you first turn on a kiln and the elements are cold the amperage is higher. Once the
    • How can I protect an existing power supply?
    Circuit Breakers
  • Circuit breakers that have tripped and have been reset continually will
    • Why does the kiln's breaker keep tripping?
  • Breakers can trip on the kiln for a couple of different reasons. What is important to know is
    • Can I install my kiln on a non-fireproof floor?

    In a word- No.

  • All surfaces within 3 feet of the kiln need to be fireproof.
    • The Spring Hinge does not go all the way back. What is wrong?
  • The hinge piece that attaches to the lid has two "ears".
  • These must go on the
    • Adjusting Thermocouples

    For ideal firing results, thermocouples in each zone should be close regarding how far they

    Electrical Supply Problems and slow kiln performance

    One of the most difficult kiln performance problems to address is a problem with the electrical

    How do I switch my kiln from 3 phase to 1 phase and vise-versa?

    On most L&L Kilns this is very easy to do. It is a matter of re-distributing the wires

    The Spring Hinge does not go all the way back. What is wrong?
  • The hinge piece that attaches to the lid has two "ears".
  • These must go on the
    • There are small ceramic discs wedged in the element holders. What are they for?
  • The discs are placed in the element holders to keep the elements from coming out during
    • How do I keep elements from falling out of the element holders in the corner of a kiln?
  • Sometimes with thick elements, especially in the corner of a DaVinci, or Easy-Load kiln, the
    • How many times do I coat my shelves with kiln wash?

    Question: I am about to run my first bisque firing in my new L&L kiln. I have coated the

    Can you use Advancer Shelves in an L&L Kiln?

    Question: I have several e28-T-3 kilns. I'm considering buying the Advancer kiln shelves made for

    Calculating ventilation requirements for heat from a kiln room
    Calculate how many CFM of air ventilation you need
  • Find the BTUs per hour (BTU/Hour) your
    • Do you need to insulate the ductwork for a Vent-Sure?
  • The molecules of air (which expand during the heating of the kiln) do not carry many BTUs.
    • Can you vent through the roof?

    It is fine to go through a roof with the L&L Vent-Sure kiln fumes vent system.